🔋 How to charge your MOVE+Updated 15 days ago
Charging the MOVE+
Step 1
Open the EVA case
Step 2
Plug the USB-C side of the cable to the charging dock and the other side to a USB charging port.
Step 3
Once your device is connected, the LED indicators of the charging dock will turn on. Now you can charge the modules.
Step 4
The LED indicators will turn on indicating the battery level.
When the modules are charged, all the indicators will remain lit.
The LED indicators represent 25%, 50%, 75%and 100% of the battery level.
Battery Life
Each light module lasts for approximately four hours of continuous use (or 24 10-minute sessions).
Once the batteries are completely empty, you can recharge them in 3.5-4 hours using the magnetic charging dock.
Note: There is no degradation in effectiveness at lower charge levels.
Battery Saving Tip
The lifetime of the battery can be maximized by storing the modules in the charging dock. There is a magnet and sensor circuit that will turn off their communications functions and save battery life. The charging dock does NOT need to be plugged in to activate this function.