🚨 Resyncing your MOVE+Updated 5 months ago
Resyncing your MOVE+
Follow this process if your modules lose synchronization when powering on.
Step 1
Turn on each module.
Step 2
Press and hold the power button on each module for 5 seconds.
After you hear a long beep, the LED indicators will start to flash to indicate syncing mode. Once all 3 modules are flashing, they will automatically turn off.
Step 3
After the modules stop flashing, place them into the charging dock (it does not need to be plugged in).
Step 4
Remove the modules from the charging dock.
Step 5
Power on one of the modules units and all should turn on. If they do not, repeat the above process.